Conwell 5725 Defender Mesh ROM Knee Brace 17 Inch

Conwell 5725 Defender Mesh ROM Knee Brace is a 17-inch orthopedic knee brace designed to provide structured stabilization, adjustable support and controlled knee movement. Its combination of breathable mesh construction, rigid side supports, adjustable fastening straps and a Range of Motion (ROM) hinge system makes it suitable for users who require more substantial knee stabilization than a conventional elastic knee support. The brace extends above and below the knee to provide support across the joint while maintaining an adjustable and secure fit.

Conwell 5725 Defender Mesh ROM Knee Brace Size Chart

For correct size selection, measure the knee circumference approximately 6 inches (15 cm) above the mid-patella. Compare your measurement with the chart below before selecting a size.

Conwell 5725 Defender Mesh ROM Knee Brace Features

The Conwell 5725 Defender Mesh ROM Knee Brace combines a supportive orthopedic structure with breathable material and an adjustable hinge mechanism. The 17-inch design extends across the knee and provides support to the areas above and below the joint. This longer construction can help maintain positioning and provide a more structured fit during use.

Main Features

• 17-inch orthopedic knee brace design
• Breathable mesh construction
• Range of Motion (ROM) hinge mechanism
• Rigid side stabilization
• Multiple adjustable fastening straps
• Open patella construction
• Support above and below the knee
• Adjustable and secure fitting
• Available in S, M, L, XL and XXL sizes
• Designed for structured orthopedic knee support

Adjustable Range of Motion Support

A key feature of this brace is its ROM hinge system. Range of Motion knee braces are designed to provide controlled movement around the knee joint according to the required hinge adjustment. This makes the brace different from a standard hinged knee support that primarily provides general medial and lateral stabilization.

The appropriate ROM setting should be selected according to the user’s individual requirements and professional advice. Where the brace is being used following an injury, medical procedure or during rehabilitation, hinge adjustment should follow the instructions provided by the treating physician, orthopedic specialist or physiotherapist.

Breathable Mesh Construction

The mesh construction helps improve airflow around the supported area. This is particularly useful with a longer structured brace because the knee, thigh and upper calf remain covered during use. Improved ventilation can contribute to greater comfort compared with heavier closed materials.

The mesh body works together with the rigid supporting components and fastening straps rather than relying solely on elastic compression for stabilization.

17-Inch Knee Brace Design

The 17-inch length provides extended coverage above and below the knee joint. This allows the supporting structure and straps to distribute stabilization across a larger area of the leg. Correct positioning remains important to ensure that the central hinge aligns properly with the knee joint.

Rigid Hinged Stabilization

The side structure provides additional external stability around the knee. When correctly positioned, the hinge should align with the natural center of the knee and move with the leg during permitted flexion and extension.

A structured hinged brace can provide a greater level of support than an ordinary elastic knee sleeve. However, correct size selection and application are important because an incorrectly positioned hinge may reduce comfort and compromise the intended support.

Open Patella Construction

The open area around the kneecap reduces direct material coverage over the patella and also provides a useful reference point when positioning the brace. The knee should remain correctly aligned within this opening when the straps are secured.

Multiple Adjustable Straps

The brace uses several fastening straps above and below the knee to help maintain a secure fit. Each strap can be adjusted independently so that support can be distributed across the leg instead of applying excessive pressure at a single point.

Straps should be tightened gradually. The brace should feel secure without causing numbness, tingling, excessive pressure or circulation problems.

How to Select the Correct Size

Measure approximately 6 inches or 15 cm above the middle of the kneecap. According to the supplied sizing chart, Small fits 33–38 cm, Medium 38–43 cm, Large 43–48 cm, XL 48–53 cm and XXL 53–58 cm.

Use the actual circumference measurement rather than relying on general clothing size. Correct sizing helps keep the brace and hinge properly positioned during use.

How to Wear Conwell 5725

Open the fastening straps before application and position the brace around the knee. Align the kneecap with the patella opening and position the hinge alongside the natural knee joint.

Secure the straps progressively above and below the knee. Once fitted, carefully check the alignment while gently bending and straightening the leg within the permitted range. The brace should remain stable and should not rotate excessively around the leg.

Orthopedic and Rehabilitation Use

The Conwell 5725 Defender Mesh ROM Knee Brace is intended for situations where structured knee stabilization and controlled movement may be required. A ROM brace may be considered during orthopedic management or rehabilitation when a healthcare professional recommends controlled knee movement and external stabilization.

Users recovering from significant knee injuries or medical procedures should follow professional guidance regarding the appropriate brace, permitted range of motion and duration of use.

Comfort and Safety

Check the skin periodically during prolonged use, particularly around the straps, brace edges and rigid components. The brace should provide firm stabilization without creating excessive pressure.

Discontinue use and seek appropriate professional advice if persistent pain, numbness, unusual swelling, circulation problems or significant skin irritation develops.

Care and Maintenance

Keep the hook-and-loop fastening surfaces clean to maintain secure closure. Follow the manufacturer’s care instructions when cleaning the mesh and padded portions, particularly where rigid hinge components are attached.

Allow washable components to air dry naturally. Avoid tumble drying, excessive heat, bleach and aggressive cleaning chemicals. Regularly inspect the straps, mesh, fasteners and hinge mechanism for damage or excessive wear.

Conwell 5725 Defender Mesh ROM Knee Brace Price in Pakistan

The supplied catalogue lists the Conwell 5725 Defender Mesh ROM Knee Brace at Rs 18,300. Keep Rs 18,300 as the Medi Outlet selling price if this remains your current price.

With its 17-inch construction, breathable mesh body, adjustable straps, rigid stabilization and ROM hinge system, Conwell 5725 is a specialized option for customers who require structured orthopedic knee support with controlled movement.