Bistos Professional Handheld Pulse Oximeter

Bistos Handheld Pulse Oximeter is a professional clinical monitoring device designed for measuring blood oxygen saturation (SpO₂), pulse rate (PR) and perfusion index (PI). Its portable construction, 3.5-inch touchscreen display, configurable alarm system and rechargeable battery make it suitable for professional patient monitoring in hospitals and clinics. The exact model of this pulse oximeter is Bistos BT-700.

Bistos Handheld Pulse Oximeter Features

The Bistos Handheld Pulse Oximeter provides clinicians with important oxygen saturation and pulse information in a compact monitoring system. According to the manufacturer, the BT-700 is intended for professional clinical use with adult and pediatric patients.

• Measures blood oxygen saturation (SpO₂)
• Measures pulse rate (PR)
• Displays perfusion index (PI)
• Displays plethysmography waveform
• 3.5-inch touchscreen display
• Spot-check monitoring mode
• Continuous monitoring mode
• Adult and pediatric patient settings
• Visual and audible alarm system
• Trend data storage
• Built-in rechargeable battery
• USB interface
• Portable clinical design

SpO₂, Pulse Rate and PI Monitoring

The BT-700 measures oxygen saturation using a compatible SpO₂ sensor connected to the patient. The device processes the detected signal and displays the measured SpO₂ value together with pulse rate information.

In addition to SpO₂ and PR, the monitor displays perfusion index or PI. A plethysmography waveform is also shown on the display, providing a graphical representation of the detected pulse signal.

3.5-Inch Touchscreen Display

The Bistos Handheld Pulse Oximeter uses a 3.5-inch touchscreen as part of its main configuration. The screen presents measured values, waveform information, patient information, battery status, alarm limits and other relevant monitoring information.

Its interface allows the operator to access work mode, patient information, alarm setup, trend records and system settings. Backlight brightness can also be adjusted according to the monitoring environment.

Spot-Check and Continuous Monitoring

An important feature of the Bistos BT-700 is the ability to select between spot-check and continuous monitoring modes.

Spot-check mode is intended for measurements and trend storage involving multiple patient IDs. According to the manufacturer, this mode can store up to 4,000 sets of data for as many as 99 patient IDs.

Continuous mode is designed for monitoring an individual patient. In this mode, measurement information can be stored at one-minute intervals. The current Bistos manual specifies storage of up to 96 hours of continuous monitoring data for a single patient.

Professional Alarm System

The BT-700 incorporates an alarm system to alert clinical staff when monitored parameters exceed configured limits or when certain technical problems occur.

Alarm settings are available for SpO₂, pulse rate and perfusion index. The device can provide visual and audible indications, while alarm volume and relevant upper or lower limits can be configured according to the clinical monitoring requirement.

Technical alarms can also provide information about conditions such as a disconnected SpO₂ sensor, sensor-off condition, unstable signal and low battery.

Adult and Pediatric Patient Monitoring

The manufacturer specifies the BT-700 for adult and pediatric patient populations. Patient type can be selected from the device settings so that appropriate monitoring and alarm configurations can be applied.

The appropriate manufacturer-approved SpO₂ sensor should always be used according to the patient and clinical application.

Built-In Rechargeable Battery

The Bistos Handheld Pulse Oximeter includes a built-in rechargeable battery, allowing the device to continue operating during patient transfer or when mains power is temporarily unavailable.

When connected to the appropriate DC power source, the internal battery can be charged. This portable power arrangement is useful for a clinical monitor that may need to be moved between different areas of a healthcare facility.

USB Interface

A USB interface is provided on the BT-700. According to the manufacturer documentation, this interface can be used for functions including software upgrading and battery charging.

Trend information can also be reviewed through the device interface, helping clinical users access historical SpO₂, PR and PI measurements.

Suitable for Hospitals and Clinics

The Bistos BT-700 is intended for use under regular supervision of clinical personnel. It is suitable for professional healthcare environments such as hospital wards and clinics where oxygen saturation and pulse information are required as part of patient monitoring.

Its portable design combines the functionality of a professional pulse oximeter with a relatively compact form factor, making it convenient for situations where a full-size multiparameter patient monitor may not be required.

Important Clinical Use Information

The device is intended for trained clinical professionals. The operator should inspect the monitor, sensor, cables and accessories before use and follow the manufacturer’s operating instructions.

Alarm limits should be configured according to the patient’s clinical situation. Medical personnel should not rely solely on an audible alarm and should continue to assess the patient’s actual clinical condition.

Bistos Handheld Pulse Oximeter Price in Pakistan

The Bistos Handheld Pulse Oximeter price in Pakistan may vary according to stock availability, accessories, supplied sensor and exchange rate. Medi Outlet can enter the current selling price according to the exact BT-700 package available.

For healthcare facilities looking for a professional portable SpO₂ monitor, the Bistos BT-700 combines SpO₂, pulse rate and PI measurement with a touchscreen display, alarm system, trend storage, rechargeable battery and flexible spot-check or continuous monitoring modes.