Conwell 5760 Hinged Knee Brace

Conwell 5760 Hinged Knee Brace is an adjustable orthopedic knee brace designed to provide additional medial and lateral knee stability while maintaining functional movement. It combines comfortable COOLMAX® fabric lining with bilateral plastic hinges, an open patella design and adjustable hook-and-loop straps. The full-open construction also makes application easier because the brace can be positioned directly around the knee instead of requiring a tight sleeve to be pulled over the foot and leg.

Conwell 5760 Hinged Knee Brace Size Chart

Correct sizing is important for comfortable support and proper positioning of the side hinges. Measurements should be taken approximately 6 inches (15 cm) above the middle of the patella. Your current supplier catalogue lists sizes S, M, L, XL and XXL.

Conwell 5760 Hinged Knee Brace Features

The Conwell 5760 Hinged Knee Brace combines flexible compression with additional side stabilization. According to Conwell, the brace is designed to offer mild support to the medial and lateral ligaments and meniscus. This makes it different from a basic elastic knee sleeve that primarily provides compression.

Bilateral Plastic Hinges

Plastic hinges are positioned on both sides of the knee. These side hinges enhance stability around the joint while allowing functional knee flexion and extension. When the brace is fitted correctly, the hinges should remain positioned along the sides of the knee rather than rotating toward the front or back of the leg.

COOLMAX® Fabric Lining

Conwell uses COOLMAX® fabric lining to improve comfort during wear. The material is intended to help the wearer remain cooler and more comfortable, an important consideration when an orthopedic knee brace needs to be worn during normal activities or rehabilitation.

Adjustable Upper and Lower Straps

The brace includes adjustable straps above and below the knee. These straps provide additional support and help keep the brace properly positioned during movement. The user can adjust the fastening according to comfort and required compression.

Open Patella Construction

The open patella section helps position the brace correctly around the kneecap. During application, the patella opening should be centered directly over the kneecap before the remaining straps are secured.

Full Open Design

Another useful feature is the full-open construction. Rather than pulling the entire brace over the foot and up the leg, the support can be opened and wrapped around the knee. This can make application and removal easier for many users.

How to Wear Conwell 5760 Hinged Knee Brace

Begin by opening all straps and hook-and-loop fastening sections. Position the brace around the knee and center the patella opening over the kneecap. Ensure that the plastic hinges are positioned correctly on both sides of the knee.

Wrap the main sections around the leg and secure them to the desired comfortable tightness. Next, wrap the upper and lower straps, pass them through their respective fastening points and secure the hook-and-loop closures.

After fitting the brace, slowly bend and straighten the knee several times. Confirm that the patella opening remains centered and the side hinges stay aligned with the knee joint.

The brace should feel supportive but should not cause excessive pressure. If numbness, tingling, unusual discoloration or increased pain occurs, loosen or remove the brace.

Support for Knee Stability

Conwell states that this hinged knee brace is intended to provide mild support to the medial and lateral ligaments and meniscus. Bilateral hinges provide greater side support than a basic non-hinged knee sleeve while still permitting functional knee movement.

The appropriate brace for an individual depends on the type and severity of the knee problem. Significant injuries or persistent symptoms should be professionally assessed before selecting an orthopedic brace.

Comfortable Adjustable Fit

Hook-and-loop closures make it possible to fine-tune the fitting. This allows the user to adjust compression according to individual leg shape and comfort instead of relying entirely on the stretch of the material.

Correct size selection remains important even with adjustable straps. Measure 15 cm above the middle of the patella and compare the measurement with the size chart before ordering.

Care and Washing Instructions

For cleaning, remove removable components where applicable and hand wash the fabric portion using mild detergent and cold water. Allow the brace to air dry naturally.

Do not wash the brace in a washing machine and do not place it in a mechanical dryer. Avoid bleach and ironing because heat and harsh chemicals may damage the material or fastening system.

Before every use, inspect the hook-and-loop closures and confirm that they fasten securely. If the closures or brace components become damaged and can no longer remain securely positioned, discontinue use until the product is properly assessed or replaced.

Important Safety Information

The Conwell 5760 Hinged Knee Brace should be used according to appropriate medical advice where required. If discomfort or pain develops, persists or increases during use, discontinue wearing the brace and consult a physician or qualified healthcare professional.

Make sure all hook-and-loop fasteners are properly secured before walking or performing other activities. Correct positioning of the side hinges and patella opening should also be checked after application.

Conwell 5760 Hinged Knee Brace Price in Pakistan

The supplied catalogue lists the Conwell 5760 Hinged Knee Brace at Rs 10,400. This price can be retained on Medi Outlet if it remains your current selling price.

With COOLMAX® fabric lining, bilateral plastic hinges, an open patella, adjustable upper and lower straps and a convenient full-open design, the Conwell 5760 offers a practical combination of knee compression, comfort and additional medial and lateral stability.